Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT2020 Mach 1
  • Rig Size:
    10,001 - 20,000 lbs pullback

View Manufacturers View Models Back to Listing

Specifications

Pump Output Maximum flow rate 30 gpm
Displacement 199 cubic inches
Hydraulic Tank Capacity 17 GAL 64.3520003 liters
Pullback 20,000 lb 90 kN
Height 78 in 1.9812 meters
Rod Carrying Capacity 400'
Max Spindle Torque 2200 FT-LB
Type POWER PIPE
Max Spindle Speed 150 RPM
Pipe Diameter 2.06 IN 5.2324 centimeters
Entry Angle 10 - 14 degrees
Min Bore Diameter 4 IN 10.16 centimeters
Weight LINED: 67 LB 30.39068879 kg
Make and Model Cummins B3.3
Ground Drive Speed FORWARD: 3.0 MPH
Min Bend Radius 130 FT
Thrust 17,000 lb 75.6kN
Fuel Type Diesel
Max Flow 30 GPM
Weight 10,800 lb 4 898.7976 kilograms
Manufacturer's Gross HP Rating 83 HP
Max Pressure 1500 PSI 103 bar
Width 50.5 in 1.2827 meters
Rated Engine RPM 2400 RPM
Fuel Tank Capacity 30 GAL 113.562 40 liters
Length 203 in 5.1562 meters
Number of Cylinders 4
Length 120 IN 304.8 centimeters
Engine Engine: Cummins B3.3
Joint Diameter 2.63 IN 6.6802 centimeters
Torque 2200 ft/lb, 150 rpm spindle speed 2983 Nm, 150 rpm spindle speed

Additional Info

DIMENSION
OVERALL LENGTH: 203 IN
OVERALL WIDTH: 51.5 IN
OVERALL HEIGHT: 78 IN
RACK CAPACITY 400'
DRILLING UNIT OPERATING MASS: 10,800 LB
ENTRY ANGLE: 10 - 14 degrees
ANGLE OF APPROACH: 18 degrees
ANGLE OF DEPARTURE: 18 degrees

POWER PIPE
LENGTH, NOMINAL: 120 IN
DIAMETER: 2.06 IN
DIAMETER, TOOL JOINT END: 2.63 IN
BEND RADIUS, MINIMUM: 130 FT
WEIGHT (LINED: 67 LB

OPERATION
SPINDLE SPEED, MAXIMUM: 150 RPM
SPINDLE TORQUE, MAXIMUM: 2200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 140 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 140 FPM
THRUST FORCE: 17,000 LB
PULLBACK FORCE: 20,000 LB
BORE DIAMETER: 4 IN
BACKREAM DIAMETER (SOIL DEPENDENT): variable
GROUND TRAVEL SPEED, MAXIMUM*
FORWARD: 3.0 MPH
REVERSE: 3.0 MPH

POWER
ENGINE: Cummins B3.3
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged
CYLINDERS: 4
DISPLACEMENT: 199 cubic inches
BORE: 3.74 IN
STROKE: 4.53 IN
MANUFACTURER’S GROSS POWER RATING: 83 HP
RATED SPEED: 2400 RPM

DRILLING FLUID SYSTEM (ON-BOARD)
DRILLING FLUID PRESSURE, MAXIMUM: 1500 PSI
DRILLING FLUID FLOW, MAXIMUM: 30 GPM

FLUID CAPACITIES
HYDRAULIC RESERVOIR: 17 GAL
FUEL TANK: 30 GAL

BATTERY
SAE RESERVE CAPACITY RATING: 195 minutes
SAE COLD CRANK RATING @ 0° F (-18° C): 950 amps

View Manufacturers View Models Back to Listing

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x