Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    American Augers
  • Model:
    DD-50
  • Rig Size:
    30,001 - 50,000 lbs pullback

View Manufacturers View Models

Specifications

Pullback 50,000 lb 222.5 kN
Fuel Type diesel
Joint Diameter 4-1/8 inch upset 104.8 mm upset
Torque 6,300 lb-ft 8542.8 Nm
Manufacturer's Gross HP Rating 240 hp 79 kW)
Pipe Diameter 3-1/2 inch 88.9 mm
Number of Cylinders 6
Thrust 50,000 lb 222.5 kN
Max Flow 135 GPM 511 lit/min
Length 22 ft 4 in 6807 mm
Max Pressure 1,200 psi 83 bar
Fluid Tank (2) X 600gal (2) x 2271 lit
Height 7 ft 3 in 2210 mm
Fuel Tank Capacity 105 gal 398 litres
Weight 8,000 lb 3629 kg
Length 15 ft 4572 mm
Entry Angle 12°—19°
Weight 215 1b 98 kg
Make and Model Caterpillar 3116 DITA
Joint Inside Diameter 1-3/4 inch 44.45 mm
Width 4 ft 6 in 1372 mm

Additional Info

DIMENSIONS
Length: 22 ft 4 in (6807 mm)
Width: 4 ft 6 in (1372 mm)
Height: 7 ft 3 in (2210 mm)

DRILLING UNIT
Maximum Thrust/Pullback: 50,000 lb (222.5 kN)
Maximum Rotary Torque: 6,300 lb-ft (8542.8 Nm)
Maximum Rotary Speed: 0-100 rpm
Downhole Rotary HP: 120 (89.5 kW)
Carriage System: Rack & Pinion
Travel System: Self propelled on steel tracks 15 hp (11.2 kW) diesel engine 12°—19
Drill Angle: 12°—19°
Wrench/Clamp: Open top type
Ground Pressure: 3.6 psi (24.9 kPa)
Weight, Drill Unit: 8,000 lb (3629 kg)
Hold Down Stakes: H-beam type

POWER UNIT
Engine: Caterpillar 3116 DITA diesel 6 cylinder turbocharged aftercooled
Rating: 240 hp (79 kW) continuous duty
Fuel Capacity: 105 U.S. gallons (398 litres)

DRILLING FLUID
Drill Fluid System: 2X600 U.S. gal. (2x2271 lit.)
Flow Rate: 0-135 GPM (0-511 lit/min)
Maximum Pressure: 1,200 psi (83 bar)
Average Drilling Flow: 10 GPM (38 lit/min)
Average Back Ream Flow: 20—40 GPM (76—152 lit/min)

TOTAL DOWN HOLE HP (kW)
Thrust/pullback HP 40 (29.8)
+Rotary HP 120 (89.5)
+Drilling fluid HP 80 (59.7)
=Total Down Hole HP 240 (179)

DRILL PIPE
AA Part Number: 01DT1516
Length: 15 ft (4572 mm)
Outside Diameter: 3-1/2 inch (88.9 mm)
Inside Diameter: 1-3/4 inch (44.45 mm)
Tool Joint O.D.: 4-1/8 inch (104.8 mm) upset
Thread Type: 2-7/8 IF
Make up Torque: 5,000 lb ft (6780 Nm) max.
Weight: 215 1b (98 kg)

TRAILER
Type: Single drop deck, dual axle
Length: 46 ft 5 in (14 147 mm)
Width: 8 ft 00 in (2438 mm)
Shipping Weight: 35,000 lb (15 876 kg)
Brakes: Air
Load Rating: 63,000 lb (28 578 kg) G.V.W.

SKID MOUNT
Length: 23 ft 6 in (7162 mm)
Height: 6 ft 6 in (1980 mm)
Volume: 3000 gal (11350 l)

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x