Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D220x300 S3
  • Rig Size:
    200,000 lbs pullback and over

View Manufacturers View Models

Specifications

Make and Model CAT C13 ACERT Tier 4 Final
Ground Drive Speed 1.8 mph 2.9 km/h
Pipe Diameter 5" at 19.5 lb/ft 12.7 cm at 29 kg/m
Length 37' 11.3 m
Fuel Type Ultra-low sulfur diesel
Max Flow 345 gpm 1306 L/min
Weight 540 lb 244.9 kg
Entry Angle 10°-17° (17.6%-30.6%)
Max Spindle Torque 30,750 ft-lb 41,691.4 Nm
Joint Inside Diameter 3.5" 8.9 cm
Thrust 242,100 lb 1076.9 kN
Max Spindle Speed 164 rpm 164 rpm
Pullback 242,100 lb 1076.9 kN
Max Pressure 1200 psi at 213 gpm 8.3 MPa at 806.3 L/min
Fuel Tank Capacity 134 gal 507.2 L
Manufacturer's Gross HP Rating 415 hp 309 kW
Hydraulic Tank Capacity 166 gal 628.4 L
Width 100" 254 cm
Rated Engine RPM 2150 rpm 2150 rpm
Engine Cooling System Liquid Liquid
Height 11.3' 3.4 m
Emissions Compliance Tier 4 Final (EU Stage IV) Tier 4 Final (EU Stage IV)
Length 20' (6.1 m 6.1 m
Weight 74,000 lb 33,565.84 kg
Max Carriage Speed 120 fpm 36.6 m/min
Joint Diameter 6.63" 16.8 cm

Additional Info

GENERAL DIMENSIONS AND WEIGHTS
Min transport length: 37' (11.3 m)
Min transport width: 100" (254 cm)
Min transport height: 11.3' (3.4 m)
Weight: 74,000 lb (33,565.84 kg)

ENGINE
Make/Model: CAT C13 ACERT Tier 4 Final
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2150 rpm
Gross horsepower: 415 hp (309 kW)
Cooling method: Liquid
Aspiration: Turbocharged and after-cooled
Emissions rating: Tier 4 Final (EU Stage IV)

OPERATIONAL
Thrust/Pullback: 242,100 lb (1076.9 kN)
Max carriage speed at max engine rpm: 120 fpm (36.6 m/min)
Max spindle torque (low at max engine rpm): 30,750 ft-lb (41,691.4 Nm)
Max spindle speed at max engine rpm: 164 rpm
Max ground drive speed at max engine rpm: 1.8 mph (2.9 km/h)
Noise level at operator’s ear: 85 dB(A)
Drill rack angle: 10°-17° (17.6%-30.6%)

FLUID CAPACITIES
Fuel tank: 134 gal (507.2 L)
Hydraulic tank: 166 gal (628.4 L)

DRILLING FLUID SYSTEM
Make: Weatherford
Max flow: 345 gpm (1306 L/min)
Max pressure: 1200 psi (8.3 MPa) at 213 gpm (806.3 L/min)

OPTIONAL CRANE
Weight: 2600 lb (1179.3 kg)
Max reach: 26.3' (8 m)
Max lifting capacity:5950 lb (2698.9 kg)
Max lifting capacity at max reach: 2530 lb (1147.6 kg)
Rotation: 400°
Wireless remote:Yes

FEATURES
Breakout system: Open-top, dual clamp, 10.2" (25.9 cm) diameter opening
Drilling lights: Yes
Flow indicator: Yes
Cab: Yes
Strike alert:Yes
Remote lockout: Yes

DRILL PIPE
Thread type: NC50 DS [4.5" (11.4 cm) IF double shoulder]
Length: 20' (6.1 m)
Rod diameter: 5" (12.7 cm) at 19.5 lb/ft (29 kg/m)
Wall thickness: .362" (9.2 mm)
Joint inside diameter:3.5" (8.9 cm)
Joint outside diameter:6.63" (16.8 cm)
Weight per joint:540 lb (244.9 kg)

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x