Deze pagina is vertaald met Google Translate

Apparatuurspecificaties Bibliotheek

Algemene modelinformatie

  • Fabrikant:
    Vermeer
  • Model:
    D220x300 S3
  • Uitrusting grootte:
    200,000 lbs pullback and over

Bekijk fabrikanten Bekijk modellen

Bestek

Make and Model CAT C13 ACERT Tier 4 Final
Ground Drive Speed 1.8 mph 2.9 km/h
Pipe Diameter 5" at 19.5 lb/ft 12.7 cm at 29 kg/m
Length 37' 11.3 m
Fuel Type Ultra-low sulfur diesel
Max Flow 345 gpm 1306 L/min
Weight 540 lb 244.9 kg
Entry Angle 10°-17° (17.6%-30.6%)
Max Spindle Torque 30,750 ft-lb 41,691.4 Nm
Joint Inside Diameter 3.5" 8.9 cm
Thrust 242,100 lb 1076.9 kN
Max Spindle Speed 164 rpm 164 rpm
Pullback 242,100 lb 1076.9 kN
Max Pressure 1200 psi at 213 gpm 8.3 MPa at 806.3 L/min
Fuel Tank Capacity 134 gal 507.2 L
Manufacturer's Gross HP Rating 415 hp 309 kW
Hydraulic Tank Capacity 166 gal 628.4 L
Width 100" 254 cm
Rated Engine RPM 2150 rpm 2150 rpm
Engine Cooling System Liquid Liquid
Height 11.3' 3.4 m
Emissions Compliance Tier 4 Final (EU Stage IV) Tier 4 Final (EU Stage IV)
Length 20' (6.1 m 6.1 m
Weight 74,000 lb 33,565.84 kg
Max Carriage Speed 120 fpm 36.6 m/min
Joint Diameter 6.63" 16.8 cm

Extra informatie

GENERAL DIMENSIONS AND WEIGHTS
Min transport length: 37' (11.3 m)
Min transport width: 100" (254 cm)
Min transport height: 11.3' (3.4 m)
Weight: 74,000 lb (33,565.84 kg)

ENGINE
Make/Model: CAT C13 ACERT Tier 4 Final
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2150 rpm
Gross horsepower: 415 hp (309 kW)
Cooling method: Liquid
Aspiration: Turbocharged and after-cooled
Emissions rating: Tier 4 Final (EU Stage IV)

OPERATIONAL
Thrust/Pullback: 242,100 lb (1076.9 kN)
Max carriage speed at max engine rpm: 120 fpm (36.6 m/min)
Max spindle torque (low at max engine rpm): 30,750 ft-lb (41,691.4 Nm)
Max spindle speed at max engine rpm: 164 rpm
Max ground drive speed at max engine rpm: 1.8 mph (2.9 km/h)
Noise level at operator’s ear: 85 dB(A)
Drill rack angle: 10°-17° (17.6%-30.6%)

FLUID CAPACITIES
Fuel tank: 134 gal (507.2 L)
Hydraulic tank: 166 gal (628.4 L)

DRILLING FLUID SYSTEM
Make: Weatherford
Max flow: 345 gpm (1306 L/min)
Max pressure: 1200 psi (8.3 MPa) at 213 gpm (806.3 L/min)

OPTIONAL CRANE
Weight: 2600 lb (1179.3 kg)
Max reach: 26.3' (8 m)
Max lifting capacity:5950 lb (2698.9 kg)
Max lifting capacity at max reach: 2530 lb (1147.6 kg)
Rotation: 400°
Wireless remote:Yes

FEATURES
Breakout system: Open-top, dual clamp, 10.2" (25.9 cm) diameter opening
Drilling lights: Yes
Flow indicator: Yes
Cab: Yes
Strike alert:Yes
Remote lockout: Yes

DRILL PIPE
Thread type: NC50 DS [4.5" (11.4 cm) IF double shoulder]
Length: 20' (6.1 m)
Rod diameter: 5" (12.7 cm) at 19.5 lb/ft (29 kg/m)
Wall thickness: .362" (9.2 mm)
Joint inside diameter:3.5" (8.9 cm)
Joint outside diameter:6.63" (16.8 cm)
Weight per joint:540 lb (244.9 kg)

Bekijk fabrikanten Bekijk modellen

Deze informatie wordt alleen ter informatie verstrekt. HDD Broker LLC kan niet instaan voor de nauwkeurigheid of volledigheid van deze informatie. Deze informatie kan door de fabrikant worden gewijzigd. Sommige specificaties kunnen per modeljaar verschillen.

HDD Broker maakt gebruik van cookies en verzamelt persoonlijke informatie op haar websites.

Lees voor meer informatie het privacybeleid en cookiebeleid van HDD Broker. Door op "Ik ga akkoord" te klikken, geeft u aan dat u uw browserinstellingen hebt aangepast aan uw voorkeuren en akkoord gaat met het gebruik van cookies door HDD Broker.

x